The Mitac Mio e538 driver works with PC2002 & PC2003.
*** Note: driver works fine (place stand approx. 5.5 inches from keyboard and bounce beam off mirror). Do not use 3rd party bundled rotational software with PC2003, it does not work, IR Extender/Amplifier is recommended**
- Pocket PC users MUST remove memory cards when installing the driver. Cards present in the system when installing will result in the Pocketop keyboard to show up in the input selector, but will not be "selectable".
- Ensure you have the lastest device system software installed for your handheld.
- Remove any previous versions of the Keyboard Driver on your handheld by
accessing the Add/Remove Programs application within the Programs directory.
Highlight the driver and tap remove.
- Perform a soft re-set.
- Download the PocketPC driver to any location on your hard drive.
- Unzip the file. Run Winzip and drag the files to a temporary directory of your choice.
(Use the free Winzip tool)
- Double Click on Setup.exe
- The Setup.exe together with ActiveSync will install the driver onto the device.
- Perform a soft re-set.
- The Keyboard driver can be activated launching any application, other than the Today screen, and accessing the "Pocketop Keyboard" from the choice of input methods. The short-cut to the choice of input methods can be found as a small keyboard icon at the lower right hand corner of the PDA display. Tap on "Pocketop Keyboard" when the pop-up menu appears activating the driver at which point icons will appear for rotation, backlight brightness, text macro and sound off/on.
- Note that bundled 3rd party rotational software does not work with our PC2003 driver.
Our IR extender will be available for approx. $19.95
-
Startup Instructions:
- If you get the error message IR port cannot be recognized then you will have to shut off the
IR beaming.
GOTO: start/setting/connection/beam
and uncheck it then click OK. You might have to do a soft reboot
- GOTO: START/SETTINGS/INPUT and sellect the Pocketop Keyboard
- Start up Word or Notepad making sure that your IR transmit/receive are in a direct line of site. Notice the small keyboard ICON on the bottom right hand corner of
your PDA/Pocket PC and sellect the Pocketop Keyboard. Now start typing and start typing.
Later you can bounce the signal off the mirror.
Please note that this driver may not be compatible with all sofware packages.
|
